Differences

This shows you the differences between two versions of the page.

--- tips_better_first_layers [2025/10/04 00:32] – [Tips] dshoop
+++ tips_better_first_layers [2025/10/08 14:22] (current) – ↷ Links adapted because of a move operation dshoop
@@ Line 23: / Line 23: @@
 </code>
-You can also include the same gcode in the [[slicer]]'s machine print start gcode or Klipper's [[START_PRINT macro]]. If the bed isn't level the print will stop.
+You can also include the same gcode in the [[slicer]]'s machine print start gcode or Klipper's [[print_start_macro]]. If the bed isn't level the print will stop.
 ==== Properly set z offset ====
-A well set [[z-offset]] is critical for layers to bond and that extends to the first layer bonding to the build plate. It can not be properly set with the paper method.
+A well set [[z_offset]] is critical for layers to bond and that extends to the first layer bonding to the build plate. It can not be properly set with the paper method.
 ==== Slower First Layer Speeds ====