tag:wip
TAG: wip,
| Page | Description |
|---|---|
| fragments for tips wip why reliability matters for three dee printing just ask the owner with a blog of death * downtime to repair * failed print as print size / process complexity increases so does chance for failure Is it possible to install a better bed leveling sensor | |
| gcode wip about ...work in progress... See <https://www.klipper3d.org/G-Codes.html> for the complete set of Klipper gcode commands. Your slicer takes a CAD model and “slices” it into layers, outputting the instructions, as gcode, necessary to control the printer to print each layer. These gcode instructions specify tool path movements and control all operations. | |
| PRINT_START Macro about wip ...work in progress... NOTE: In initial versions of Klipper that shipped as part of Elegoo's firmware distributions the PRINT_START macro was called automatically as part of the start of a new print. A latter version of Klipper changed this behavior. This meant that owners who relied on that behavior often experienced issues like the bed mesh not loading or other expected operations part of the start of printing not occurring. | |
| Z Probe Calibration wip z_offset setup ...work in progress... See <https://www.klipper3d.org/Probe_Calibrate.html> for details on probe calibration. Note: calibrating the z probe is NOT the same as setting the gcode z offset. Also Note: the “z offset” set as part of probe calibration is not the “gcode z offset | |
| z probe wip about ... work in progress... The Neptune 4 is equipped with an inductive probe that triggers from the metal build plate and measures the distance from the probe to the plate which in turn is translated to a Z distance of the nozzle above the bed. |